USB-TYT01 Toyota 2×6P USB+AUX Audio Adapter
Car Auto Audio MP3 Player Interface Aux In Adapter Cable Fit for Toyota 2×6P USB AUX Audio Adapter
Features
1.Direct Connection via CD changer Port with CD quality sound
2.Control music files from your car radio panel or steering wheel.
3.Support USB Flash, SD Card and 3.5mm jack input.
4.Building in high quality MP3/WMA decoder
5.Building in Amplifier chips
6.No signal interfere, No battery required
7.Smart design and Easy to install and use
8. Brand New and High Quality
Specifications
1. Item type: Cables, adapters & sockets
2. Voltage input: DC 12V
3. Signal-to-noise: 95DB
4. Max. current: 200mA
5. Frequency response: 20HZ-20KHZ
6. Working temperature: -10-80 Celsius degree
7. Total Harmonic Distortion:0.01%
8. Package size: 15 * 10 * 4cm
9. D/A Device: 24BIT 192KHZ
10.Total Length: about 70.8inch
Compatible with
Toyota:
4Runner 2003-2011,
Avalon 2005-2011,
Avensis 2003-2011,
Auris (after 2007),
Camry 2005-2011,
Celica 2003-2005,
Corolla 2005-2011,
FJ Cruiser 2007-2010,
Highlander 2004-2011,
Land cruiser 2003-2011,
Matrix 2005-2011
Mark X 2005-2011,
MR2 2004-2010,
RAV4 2003-2011,
Sequoia 2005-2011,
Sienna 2004-2010,
Solara 2004-2008,
Tacoma 2005-2011,
Tundra 2004-2011,
Venza 2009-2011,
Vitz 2006-2010,
Yaris 2006-2011
LEXUS:
ES 300/330 2004-2011, IS 220/250/300/350 2006-2011, GS 300/400/430/450H 2006-2011, GX 470 2004-2009, , LS 460 2007-2011, LX 570 2008-2011,,RX 300/330/350/400H 2004-2009, SC 430 2005-2010
Note:
1.Not work with Navigation system and XM radio
2. Not work with 52867(Vios), Aygo, 58805 (2003 RAV4 ), 56018, 58813,T18303,B9010, B9004 (2007 RAV4),RAV4 with a factory
navigation,TNS Travel 700, P1718,P3905,P6813,P6832,WH8403,W58816,T18303, W13807/W13081 / W13086 (Auris),
W53904(Panasonic,Avensis 2007), W58824, W58832,36458, AD1812(Delphi on 2010-2011 Tundra/
Sequoia),AD6900(Delphi on 2000-2004 Avalon), other AD-xxx radios
Installation Instruction:
1. Turn off car engine and remove key from ignition (if your radio use a security code, make sure that you have the code before unplugging the radio.)
2. Disassemble the radio from the dash and find CD changer port at the back of radio.
3. Plug the USB Car Adapter connector into CD changer port firmly.(For Audi/V.W/Skoda/Seat radio, connect the GND cable to the shield of the radio)
4. Insert USB stick or SD card/ T/F Card into USB port. once the unit is installed just power on the car radio ,you can Press CD button then to check symbol of LED light being on. Meanwhile CDC,EX or CD01 will display on the radio screen( Depends on radio type). Now it will work normally.
After successfully test, re-assemble the radio, and lead USB and aux cable to proper
Package Contents
1 x USB AUX Car Audio Adapter
1x Card reader
1x User’s manual